Installing iPhone 3GS Front Panel

first image

Step 1 — Display
Remove the two Phillips #00 screws from the dock-connector end of the iPhone.
Make sure to keep all the screws organized as you are taking the phone apart. They are different sizes.

Step 1 — Display Remove the two Phillips #00 screws from the dock-connector end of the iPhone.Make sure to keep all the screws organized as you are taking the phone apart. They are different sizes.first imageStep 2

Remove the metal handle from the suction cup. It’s easier and safer to grip the suction cup’s base instead of the metal handle.

Be very careful when opening the iPhone so that the cables under the display are not severed.

There is a rubber gasket between the silver front bezel and black display assembly. A bit of force is required in this step to separate the iPhone’s display assembly.

Use a small suction cup near the Home button to gently pull up the bottom portion of the iPhone’s display assembly.

If the display assembly is too damaged to allow the suction cup to adhere, tape with a strong adhesive such as duct .first image

Step 3

The display assembly is still connected to the iPhone by several cables, so don’t try to remove it entirely just yet.

Rotate the display assembly up until it is at an angle of approximately 45 degrees.

iFixit MacBook Air Teardown Reveals Six Batteries!

FixIt has posted their teardown of the 11.6-inch MacBook Air revealing six batteries.

Observations:
? The power button is now integrated into the keyboard, instead of it being part of the upper case.
? The inside of the MacBook Air is dominated by six individual lithium-polymer cells making up the 35 Wh battery.
? The SSD unit appears to be assembled by Toshiba and is model number THNSNC064GMDJ.
? The new MacBook Air uses the same Broadcom Wi-Fi/Bluetooth chip as the current lineup of MacBook Pros. The model number is BCM943224PCIEBT2.
? Cirrus Audio 4206ACNZ audio controller.
? Like all previous MacBook Airs, the RAM is soldered to the logic board and is not upgradable.

MacBook Air 11″ Model A1370 Repairability: 4 out of 10 (10 is easiest to repair)
? Once you manage to take off the bottom cover, all the parts are pretty easily replaceable.
? Opening the bottom cover is quite difficult if you don’t have the right screwdriver. It’s clear that Apple didn’t want people to open their machine.
? All the components — including RAM and hard drive — are proprietary, meaning that no off-the-shelf parts will work in it without serious rigging.

first imagestep 1

  • A new contender in the computer featherweight division has arrived!
  • We got our hands on the new MacBook Air 11″ A1370, and judging from the picture on the box, it’s thinner than we expected.
  • Technical specs on the thinnest Apple computer to date:
    • 1.4GHz or 1.6GHz Intel Core 2 Duo processor
    • 2GB DDR3 SDRAM (build to order option of 4GB)
    • 64GB or 128GB Flash Storage
    • NVIDIA GeForce 320M graphics processor

first imagestep 2

We think this is absolutely awesome, and a couple of MacBook Air generations overdue.
Compensating for the lack of an optical drive, the box includes a USB software reinstall drive. The drive is 8 GB total, and contains both Snow Leopard and iLife ’11.
The drive is bootable by holding down the “C” key on startup, just like a normal DVD restore disc.
The USB drive appears to be read-only, but we haven’t tried any serious hacking to prove otherwise.

We think this is absolutely awesome, and a couple of MacBook Air generations overdue.Compensating for the lack of an optical drive, the box includes a USB software reinstall drive. The drive is 8 GB total, and contains both Snow Leopard and iLife ’11.The drive is bootable by holding down the “C” key on startup, just like a normal DVD restore disc.The USB drive appears to be read-only, but we haven’t tried any serious hacking to prove otherwise.

first imageStep 3

The new MacBook Air’s Magsafe power adapter has the same 45W 3.1A 14.5V rating as the old model, but at a fraction of the size.

The power button is now integrated into the keyboard, instead of it being part of the upper case.first image

Step 4

  • Measuring in at 11.8″ wide and 7.56″ deep and tapering off from .68″ to .11″ in height, the new MacBook Air looks a lot like a midget among dwarves compared to the old models.

  • A frontal view reveals the omission of the IR sensor and sleep LED.

  • The flip-open port door has been scrapped, and the new model manages to fit an extra USB 2.0 port along its right edge.

first imageStep 5Apple apparently doesn’t want you inside this thing. They decided to use 5-point Security Torx to attach the lower case.

We had to file a couple of flathead screwdrivers to take out the funky screws.

Here’s a 1366×768 wallpaper version for the new MB Air owners out there. We won’t tell where you got it from.

Step 6

Drumroll please!

Lifting of the lower case after much struggling with those pesky case screws, we get our first look at the innards.

The inside of the MacBook Air is dominated by six individual lithium-polymer cells making up the 35 Wh battery.standard image 2Step 7

The large battery assembly is held in by five T5 Torx screws.

Apple claims that the battery will last up to five hours with active use, and up to thirty days in standby.

This battery is 35 watt-hours. Previous revisions of 13″ MacBook Air machines have included 37 or 40 watt-hour battery packs. Since this Air has a smaller screen and lacks a spinning hard drive, we’d expect run time to be somewhat better than earlier Airs.standard image 2standard image 3first imageStep 8

After another T5 Torx screw is removed, the 64GB flash storage board can be disconnected from the logic board. It would be easily user-replaceable if you disregard the strange 5-point Torx needed to get inside.

The Mini PCI Express form factor SSD drive is a completely custom part, and will probably only be available through Apple support services, thereby putting another nail in the coffin for user-serviceability.standard image 2

How to Put Your Apple TV 2G Into DFU Mode

These are instructions on how to put your Apple TV 2G into DFU mode.

Step One
Connect your Apple TV to the power outlet and to your computer via a Micro-USB cable.Product Detailsor Product Details

Step Two
Hold down the Menu and Down buttons on your remote for about six seconds until the light on the device begins to blink rapidly.

Step Three
Let go of both buttons then press and hold the Menu and Play buttons together for another six seconds, then release.

Step Four
iTunes will then detect the device in DFU mode.